>> RS Plastic Chain
RS Plastic Chain consists of polyacetal chain links and 18-8 stainless steel pins and operates with standard roller chain sprockets based on power transmission roller chain. Tsubaki RS-type has flat top side for power transmission or conveying use. MWB and MWG specifications are also available.
"E" Series (Electro-Conductive Series)
The special plastic used in the "E" series is electro conductive and permits electro-discharge. These chains are suitable for applications where there is electric noise, electric sparks, or where dust collects due to static electricity. Volume resistivity :
"Y" & "SY" Series (Anti-Chemical Series)
The amazing "Y" & "SY" Series utilizes engineered plastic which permits the chain to perform well even where chloride, acid, alkaline, oxidizers, and most organic solvents are present. "SY" series is a combination of a "Y" Series plastic block link and titanium pin and performs well even when exposed to sulphuric and hydrochloric acid.
"KV" Series (Heat Resistant Series)
The Tsubaki "KV" series is made of a resilient new engineered plastic which can withstand environments where temperatures reach 180 c in contrast to plastic chain made of conventional plastic, this chain will not lose its valuable properties at high temperatures.
RS Type
Chain links are made of polyacetal. Pins are made of 18-8 stainless steel.
Dimensions-mm
Chain
No. |
P |
R |
W |
L |
L0 |
H1 |
H2 |
H |
Approx. Mass kg/m |
Dia. D |
Color |
RS40P |
12.70 |
7.94 |
7.95 |
20 |
23.1 |
6 |
6.7 |
12.7 |
.36 |
4 |
*Brown + White |
RS60P |
19.05 |
11.91 |
12.7 |
30 |
34 |
8.5 |
8.8 |
17.3 |
.72 |
6 |
*Low friction type
RS Double Pitch Type
Chain links are made of polyacetal. Pins are made of 18-8 stainless steel.
Dimensions-mm
| Chain No. | Chain Pitch | Slat Width | Approx. Mass kg/m | Color |
| RS2040P | 25.4 | 50.0 | .42 | *Brown + White |
Dimensions-mm
Chain No. |
P |
Minimum Tensile Strength kN {kgf} |
Ambient Temperature Range |
|||
"E" |
"Y" "SY" |
"KV" |
"E" "Y" "SY" |
"KV" |
||
RS40P (E, Y, SY, KV) |
12.70 |
0.34 {35} |
0.25 {25} |
0.44 {45} |
-20° ~ 80°C |
-20° ~ 180°C |
RS60P (E, Y, SY, KV) |
19.05 |
0.64 {65} |
0.49 {50} |
0.88 {90} |
-20° ~ 80°C |
-20° ~ 180°C |
RS2040P (E, Y, SY, KV) [A2040P (E, Y, SY, KV)] |
25.40 |
0.34 {35} |
0.25 {25} |
0.25 {25} |
-20° ~ 80°C |
-20° ~ 180°C |
Dimensions-mm
Chain No. |
Maximum Allowable Chain Speed m/min. |
Maximum Allowable Load kN {kgf} |
Sliding Coefficient of Friction |
||
"E" |
"Y" "SY" "KV" |
||||
RS40P (E, Y, SY, KV) |
60 |
50 |
RS40P |
0.44 {45} |
0.25 |
RS60P (E, Y, SY, KV) |
60 |
50 |
RS60P |
0.88 {90} |
.025 |
RS2040P (E, Y, SY, KV) [A2040P (E, Y, SY, KV)] |
60 |
50 |
RS2040P |
0.44 {45} |
0.25 |